M24C02.cpp

Go to the documentation of this file.

#include <M24C02.h>
 
M24C02::M24C02( uint8_t i2c_address ) : I2C_device( i2c_address )
{
}
 
M24C02::M24C02( TwoWire& wire, uint8_t i2c_address ) : I2C_device( wire, i2c_address )
{
}
 
M24C02::~M24C02()
{
}
 
void M24C02::begin( void )
{
}
 
int M24C02::write( int byte_adr, uint8_t data )
{
    if ( !wait_write_complete( 10 ) )
        return -10;
    
    int r = reg_w( byte_adr, data );
    
    if ( !wait_write_complete( 10 ) )
        return -10;
    
    return 1;
}
 
int M24C02::write( int byte_adr, const uint8_t *dp, int length )
{
    int w_size;
    int written = 0;
 
    while ( length ) {
        w_size  = ( PAGE_WRITE_SIZE < length ) ? PAGE_WRITE_SIZE : length;
        w_size  = ( PAGE_WRITE_SIZE - (byte_adr % PAGE_WRITE_SIZE) < w_size ) ? PAGE_WRITE_SIZE - (byte_adr % PAGE_WRITE_SIZE) : w_size;
        
        if ( !wait_write_complete( 10 ) )
            return -10;
        
        w_size  = reg_w( byte_adr, dp, w_size ) - 1;
 
        if ( w_size < 0 )
            return w_size;
        
        length      -= w_size;
        written     += w_size;
        byte_adr    += w_size;
        dp          += w_size;
    }
 
    if ( !wait_write_complete( 10 ) )
        return -10;
    
    return written;
}
 
int M24C02::wait_write_complete( int n )
{
    while ( !ping() && n-- )
        delay( 1 );
    
    if ( !n )
        Serial.println("time out in M24C02::wait_write_complete()");
 
    return n;
}
 
uint8_t M24C02::read( int byte_adr )
{
    return reg_r( byte_adr );
}
 
int M24C02::read( int byte_adr, uint8_t *dp, int length )
{
    int r_size;
    int read_done   = 0;
 
    while ( length ) {
        r_size  = ( PAGE_READ_SIZE < length ) ? PAGE_READ_SIZE : length;
 
        r_size  = reg_r( byte_adr, dp, r_size );
 
        length      -= r_size;
        read_done   += r_size;
        byte_adr    += r_size;
        dp          += r_size;
    }
    
    return read_done;
}
 
int M24C02::update( int byte_adr, uint8_t data )
{
    if ( data == read( byte_adr ) )
        return 0;
    
    return  write( byte_adr, data );
}