Subsweep

Module to configure subsweeps. More...

Functions
void	acc_config_num_subsweeps_set (acc_config_t *config, uint8_t num_subsweeps)
	Set the number of subsweeps to use. More...
uint8_t	acc_config_num_subsweeps_get (const acc_config_t *config)
	Get the number of subsweeps to use. More...
void	acc_config_subsweep_start_point_set (acc_config_t *config, int32_t start_point, uint8_t index)
	Set the starting point of the sweep. More...
int32_t	acc_config_subsweep_start_point_get (const acc_config_t *config, uint8_t index)
	Get the starting point of the sweep. More...
void	acc_config_subsweep_num_points_set (acc_config_t *config, uint16_t num_points, uint8_t index)
	Set the number of data points to measure. More...
uint16_t	acc_config_subsweep_num_points_get (const acc_config_t *config, uint8_t index)
	Get the number of data points to measure. More...
void	acc_config_subsweep_step_length_set (acc_config_t *config, uint16_t step_length, uint8_t index)
	Set the step length in a sweep. More...
uint16_t	acc_config_subsweep_step_length_get (const acc_config_t *config, uint8_t index)
	Get the step length in a sweep. More...
void	acc_config_subsweep_profile_set (acc_config_t *config, acc_config_profile_t profile, uint8_t index)
	Set a profile. More...
acc_config_profile_t	acc_config_subsweep_profile_get (const acc_config_t *config, uint8_t index)
	Get the currently used profile. More...
void	acc_config_subsweep_hwaas_set (acc_config_t *config, uint16_t hwaas, uint8_t index)
	Set the hardware accelerated average samples (HWAAS) More...
uint16_t	acc_config_subsweep_hwaas_get (const acc_config_t *config, uint8_t index)
	Get the hardware accelerated average samples (HWAAS) More...
void	acc_config_subsweep_receiver_gain_set (acc_config_t *config, uint8_t gain, uint8_t index)
	Set receiver gain setting. More...
uint8_t	acc_config_subsweep_receiver_gain_get (const acc_config_t *config, uint8_t index)
	Get receiver gain setting. More...
void	acc_config_subsweep_enable_tx_set (acc_config_t *config, bool enable, uint8_t index)
	Enable or disable the transmitter. More...
bool	acc_config_subsweep_enable_tx_get (const acc_config_t *config, uint8_t index)
	Get transmitter enable mode. More...
void	acc_config_subsweep_prf_set (acc_config_t *config, acc_config_prf_t prf, uint8_t index)
	Set Pulse Repetition Frequency. More...
acc_config_prf_t	acc_config_subsweep_prf_get (const acc_config_t *config, uint8_t index)
	Get Pulse Repetition Frequency. More...
void	acc_config_subsweep_phase_enhancement_set (acc_config_t *config, bool enable, uint8_t index)
	Set the phase enhancement enabled configuration. More...
bool	acc_config_subsweep_phase_enhancement_get (const acc_config_t *config, uint8_t index)
	Get the phase enhancement enabled configuration. More...
void	acc_config_subsweep_enable_loopback_set (acc_config_t *config, bool enable, uint8_t index)
	Set the loopback enabled configuration. More...
bool	acc_config_subsweep_enable_loopback_get (const acc_config_t *config, uint8_t index)
	Get the enable loopback configuration. More...

Detailed Description

Module to configure subsweeps.

Function Documentation

acc_config_num_subsweeps_get()

uint8_t acc_config_num_subsweeps_get

(

const acc_config_t *

config

)

Get the number of subsweeps to use.

Parameters

[in]

config

The configuration

Returns

The number of subsweeps

Examples

example_detector_distance_with_iq_data_print.c, and example_service_subsweeps.c.

acc_config_num_subsweeps_set()

void acc_config_num_subsweeps_set	(	acc_config_t *	config,
		uint8_t	num_subsweeps
	)

Set the number of subsweeps to use.

Parameters

[in]	config	The configuration
[in]	num_subsweeps	The number of subsweeps

Examples

example_service_subsweeps.c.

acc_config_subsweep_enable_loopback_get()

bool acc_config_subsweep_enable_loopback_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the enable loopback configuration.

See acc_config_enable_loopback_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

true if loopback is enabled, false otherwise

acc_config_subsweep_enable_loopback_set()

void acc_config_subsweep_enable_loopback_set	(	acc_config_t *	config,
		bool	enable,
		uint8_t	index
	)

Set the loopback enabled configuration.

See acc_config_enable_loopback_set

Parameters

[in]	config	The configuration
[in]	enable	true if loopback to be enabled, false otherwise
[in]	index	The subsweep index

acc_config_subsweep_enable_tx_get()

bool acc_config_subsweep_enable_tx_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get transmitter enable mode.

See acc_config_enable_tx_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

true if the transmitter is enabled

acc_config_subsweep_enable_tx_set()

void acc_config_subsweep_enable_tx_set	(	acc_config_t *	config,
		bool	enable,
		uint8_t	index
	)

Enable or disable the transmitter.

See acc_config_enable_tx_set

Parameters

[in]	config	The configuration
[in]	enable	true to enable the transmitter
[in]	index	The subsweep index

acc_config_subsweep_hwaas_get()

uint16_t acc_config_subsweep_hwaas_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the hardware accelerated average samples (HWAAS)

See acc_config_hwaas_get

Parameters

[in]	config	The config to get hwaas from
[in]	index	The subsweep index

Returns

Hardware accelerated average samples

acc_config_subsweep_hwaas_set()

void acc_config_subsweep_hwaas_set	(	acc_config_t *	config,
		uint16_t	hwaas,
		uint8_t	index
	)

Set the hardware accelerated average samples (HWAAS)

See acc_config_hwaas_set

Parameters

[in]	config	The config to set hwaas for
[in]	hwaas	Hardware accelerated average samples
[in]	index	The subsweep index

acc_config_subsweep_num_points_get()

uint16_t acc_config_subsweep_num_points_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the number of data points to measure.

See acc_config_num_points_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

Number of data points to measure

acc_config_subsweep_num_points_set()

void acc_config_subsweep_num_points_set	(	acc_config_t *	config,
		uint16_t	num_points,
		uint8_t	index
	)

Set the number of data points to measure.

See acc_config_num_points_set

Parameters

[in]	config	The configuration
[in]	num_points	Number of data points to measure
[in]	index	The subsweep index

Examples

example_service_subsweeps.c.

acc_config_subsweep_phase_enhancement_get()

bool acc_config_subsweep_phase_enhancement_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the phase enhancement enabled configuration.

See acc_config_phase_enhancement_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

true if phase enhancement is enabled, false otherwise

acc_config_subsweep_phase_enhancement_set()

void acc_config_subsweep_phase_enhancement_set	(	acc_config_t *	config,
		bool	enable,
		uint8_t	index
	)

Set the phase enhancement enabled configuration.

See acc_config_phase_enhancement_set

Parameters

[in]	config	The configuration
[in]	enable	true if phase enhancement to be enabled, false otherwise
[in]	index	The subsweep index

acc_config_subsweep_prf_get()

acc_config_prf_t acc_config_subsweep_prf_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get Pulse Repetition Frequency.

See acc_config_prf_t for details.

Parameters

[in]

config

The configuration

Returns

Pulse Repetition Frequency

Parameters

[in]

index

The subsweep index

acc_config_subsweep_prf_set()

void acc_config_subsweep_prf_set	(	acc_config_t *	config,
		acc_config_prf_t	prf,
		uint8_t	index
	)

Set Pulse Repetition Frequency.

See acc_config_prf_t for details.

Parameters

[in]	config	The configuration
[in]	prf	The Pulse Repetition Frequency to use
[in]	index	The subsweep index

acc_config_subsweep_profile_get()

acc_config_profile_t acc_config_subsweep_profile_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the currently used profile.

See acc_config_profile_get

Parameters

[in]	config	The config to get a profile for
[in]	index	The subsweep index

Returns

The current profile, 0 if config is invalid

acc_config_subsweep_profile_set()

void acc_config_subsweep_profile_set	(	acc_config_t *	config,
		acc_config_profile_t	profile,
		uint8_t	index
	)

Set a profile.

See acc_config_profile_set

Parameters

[in]	config	The config to set a profile for
[in]	profile	The profile to set
[in]	index	The subsweep index

acc_config_subsweep_receiver_gain_get()

uint8_t acc_config_subsweep_receiver_gain_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get receiver gain setting.

See acc_config_receiver_gain_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

Receiver gain setting

acc_config_subsweep_receiver_gain_set()

void acc_config_subsweep_receiver_gain_set	(	acc_config_t *	config,
		uint8_t	gain,
		uint8_t	index
	)

Set receiver gain setting.

See acc_config_receiver_gain_set

Parameters

[in]	config	The configuration
[in]	gain	Receiver gain setting
[in]	index	The subsweep index

Examples

example_service_subsweeps.c.

acc_config_subsweep_start_point_get()

int32_t acc_config_subsweep_start_point_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the starting point of the sweep.

See acc_config_start_point_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

The starting point of the sweep

Examples

example_detector_distance_with_iq_data_print.c.

acc_config_subsweep_start_point_set()

void acc_config_subsweep_start_point_set	(	acc_config_t *	config,
		int32_t	start_point,
		uint8_t	index
	)

Set the starting point of the sweep.

See acc_config_start_point_set

Parameters

[in]	config	The configuration
[in]	start_point	The starting point of the sweep
[in]	index	The subsweep index

Examples

example_service_subsweeps.c.

acc_config_subsweep_step_length_get()

uint16_t acc_config_subsweep_step_length_get	(	const acc_config_t *	config,
		uint8_t	index
	)

Get the step length in a sweep.

See acc_config_step_length_get

Parameters

[in]	config	The configuration
[in]	index	The subsweep index

Returns

The step length

Examples

example_detector_distance_with_iq_data_print.c.

acc_config_subsweep_step_length_set()

void acc_config_subsweep_step_length_set	(	acc_config_t *	config,
		uint16_t	step_length,
		uint8_t	index
	)

Set the step length in a sweep.

See acc_config_step_length_set

Parameters

[in]	config	The configuration
[in]	step_length	The step length
[in]	index	The subsweep index