- Generated by
1.9.8
|
MakeBlock Drive Updated
Updated library for MakeBlock Ranger
|
This is the complete list of members for MeSmartServo, including all inherited members.
| _bitPeriod (defined in MeSerial) | MeSerial | protected |
| _byte (defined in MeSerial) | MeSerial | protected |
| _hard (defined in MeSerial) | MeSerial | protected |
| _lastTime (defined in MeSerial) | MeSerial | protected |
| _polling (defined in MeSerial) | MeSerial | protected |
| _port | MePort | protected |
| _scratch (defined in MeSerial) | MeSerial | protected |
| _slot | MePort | protected |
| aRead1(void) | MePort | |
| aRead2(void) | MePort | |
| assignDevIdRequest(void) | MeSmartServo | |
| assignDevIdResponse(void *arg) | MeSmartServo | |
| available() | MeSerial | virtual |
| aWrite1(int16_t value) | MePort | |
| aWrite2(int16_t value) | MePort | |
| begin(long baudrate) | MeSerial | |
| buffer (defined in MeSerial) | MeSerial | protected |
| bufferIndex (defined in MeSerial) | MeSerial | protected |
| concatenateWith(String s1, String s2) (defined in MeSerial) | MeSerial | |
| dataLineAvailable(void) (defined in MeSerial) | MeSerial | |
| dpRead1(void) | MePort | |
| dpRead2(void) | MePort | |
| dRead1(uint8_t mode=INPUT) | MePort | |
| dRead2(uint8_t mode=INPUT) | MePort | |
| dWrite1(bool value) | MePort | |
| dWrite2(bool value) | MePort | |
| end(void) | MeSerial | |
| equalString(String s1, String s2) (defined in MeSerial) | MeSerial | |
| errorCodeCheckResponse(void *arg) | MeSmartServo | |
| flush() (defined in SoftwareSerial) | SoftwareSerial | virtual |
| getAngleRequest(uint8_t devId) | MeSmartServo | |
| getCurrentRequest(uint8_t devId) | MeSmartServo | |
| getPort(void) | MePort | |
| getSlot(void) | MePort | |
| getSpeedRequest(uint8_t devId) | MeSmartServo | |
| getTempRequest(uint8_t devId) | MeSmartServo | |
| getValue(String key) (defined in MeSerial) | MeSerial | |
| getVoltageRequest(uint8_t devId) | MeSmartServo | |
| handle_interrupt() __attribute__((__always_inline__)) (defined in SoftwareSerial) | SoftwareSerial | inlinestatic |
| handSharke(uint8_t dev_id) | MeSmartServo | |
| isListening(void) | MeSerial | |
| lastLine (defined in MeSerial) | MeSerial | protected |
| letterOf(int i, String s) (defined in MeSerial) | MeSerial | |
| listen(void) | MeSerial | |
| MePort(void) | MePort | |
| MePort(uint8_t port) | MePort | |
| MePort(uint8_t port, uint8_t slot) | MePort | |
| MeSerial(void) | MeSerial | |
| MeSerial(uint8_t port) | MeSerial | |
| MeSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic=false) | MeSerial | |
| MeSmartServo() | MeSmartServo | |
| MeSmartServo(uint8_t port) | MeSmartServo | |
| move(uint8_t dev_id, long angle_value, float speed, smartServoCb callback=NULL) | MeSmartServo | |
| moveTo(uint8_t dev_id, long angle_value, float speed, smartServoCb callback=NULL) | MeSmartServo | |
| operator bool() (defined in SoftwareSerial) | SoftwareSerial | inline |
| overflow() (defined in SoftwareSerial) | SoftwareSerial | inline |
| peek() (defined in SoftwareSerial) | SoftwareSerial | |
| pin(void) | MePort | |
| pin(uint8_t port, uint8_t slot) | MePort | |
| pin1(void) | MePort | |
| pin2(void) | MePort | |
| poll(void) | MeSerial | |
| printf(char *fmt,...) | MeSerial | |
| processSysexMessage(void) | MeSmartServo | |
| read() | MeSerial | virtual |
| readByte(uint8_t *argv, int16_t idx) | MeSmartServo | |
| readDataLine(void) (defined in MeSerial) | MeSerial | |
| readFloat(uint8_t *argv, int16_t idx) | MeSmartServo | |
| readLong(uint8_t *argv, int idx) | MeSmartServo | |
| readShort(uint8_t *argv, int16_t idx, boolean ignore_high) | MeSmartServo | |
| reset(uint8_t port) | MePort | |
| reset(uint8_t port, uint8_t slot) | MePort | |
| s1 | MePort | protected |
| s2 | MePort | protected |
| sendByte(uint8_t val) | MeSmartServo | |
| sendFloat(float val) | MeSmartServo | |
| sendLong(long val) | MeSmartServo | |
| sendShort(int16_t val, boolean ignore_high) | MeSmartServo | |
| sendString(char *str) | MeSerial | |
| setBreak(uint8_t dev_id, uint8_t breakStatus) | MeSmartServo | |
| setHardware(bool mode) | MeSerial | |
| setInitAngle(uint8_t dev_id, uint8_t=0, int16_t=40) | MeSmartServo | |
| setPwmMove(uint8_t dev_id, int16_t pwm_value) | MeSmartServo | |
| setRGBLed(uint8_t dev_id, uint8_t r_value, uint8_t g_value, uint8_t b_value) | MeSmartServo | |
| setZero(uint8_t dev_id) | MeSmartServo | |
| smartServoCmdResponse(void *arg) | MeSmartServo | |
| smartServoEventHandle(void) | MeSmartServo | |
| SoftwareSerial(uint8_t receivePin, uint8_t transmitPin, bool inverse_logic=false) (defined in SoftwareSerial) | SoftwareSerial | |
| stopListening() (defined in SoftwareSerial) | SoftwareSerial | |
| stringLength(String s) (defined in MeSerial) | MeSerial | |
| write(uint8_t byte) | MeSerial | virtual |
| ~SoftwareSerial() (defined in SoftwareSerial) | SoftwareSerial |
1.9.8