- Generated by
1.9.8
|
MakeBlock Drive Updated
Updated library for MakeBlock Ranger
|
This is the complete list of members for MeMegaPiPro4DcMotor, including all inherited members.
| _port | MePort | protected |
| _slot | MePort | protected |
| aRead1(void) | MePort | |
| aRead2(void) | MePort | |
| aWrite1(int16_t value) | MePort | |
| aWrite2(int16_t value) | MePort | |
| dpRead1(void) | MePort | |
| dpRead2(void) | MePort | |
| dRead1(uint8_t mode=INPUT) | MePort | |
| dRead2(uint8_t mode=INPUT) | MePort | |
| dWrite1(bool value) | MePort | |
| dWrite2(bool value) | MePort | |
| getPort(void) | MePort | |
| getSlot(void) | MePort | |
| MeMegaPiPro4DcMotor(void) | MeMegaPiPro4DcMotor | |
| MeMegaPiPro4DcMotor(uint8_t port) | MeMegaPiPro4DcMotor | |
| MePort(void) | MePort | |
| MePort(uint8_t port) | MePort | |
| MePort(uint8_t port, uint8_t slot) | MePort | |
| pin(void) | MePort | |
| pin(uint8_t port, uint8_t slot) | MePort | |
| pin1(void) | MePort | |
| pin2(void) | MePort | |
| reset(uint8_t port) | MeMegaPiPro4DcMotor | |
| reset(uint8_t port, uint8_t slot) | MeMegaPiPro4DcMotor | |
| run(int16_t speed) | MeMegaPiPro4DcMotor | |
| s1 | MePort | protected |
| s2 | MePort | protected |
| setpin(uint8_t dir_pin, uint8_t pwm_pin) | MeMegaPiPro4DcMotor | |
| stop(void) | MeMegaPiPro4DcMotor |
1.9.8