docs/html/_region_a_s923_8h.html

  ______                              _

 / _____)             _              | |

( (____  _____ ____ _| |_ _____  ____| |__

 \____ \| ___ |    (_   _) ___ |/ ___)  _ \

 _____) ) ____| | | || |_| ____( (___| | | |

(______/|_____)_|_|_| \__)_____)\____)_| |_|

(C)2013 Semtech


 ___ _____ _   ___ _  _____ ___  ___  ___ ___

/ __|_   _/_\ / __| |/ / __/ _ \| _ \/ __| __|

\__ \ | |/ _ \ (__| ' <| _| (_) |   / (__| _|

|___/ |_/_/ \_\___|_|\_\_| \___/|_|_\\___|___|

embedded.connectivity.solutions===============
Macros
#define	AS923_MAX_NB_CHANNELS 16

#define	AS923_NUMB_DEFAULT_CHANNELS 8

#define	AS923_NUMB_CHANNELS_CF_LIST 5

#define	AS923_TX_MIN_DATARATE DR_0

#define	AS923_TX_MAX_DATARATE DR_7

#define	AS923_RX_MIN_DATARATE DR_0

#define	AS923_RX_MAX_DATARATE DR_7

#define	AS923_DEFAULT_DATARATE DR_2

#define	AS923_DWELL_LIMIT_DATARATE DR_2

#define	AS923_MIN_RX1_DR_OFFSET 0

#define	AS923_MAX_RX1_DR_OFFSET 7

#define	AS923_DEFAULT_RX1_DR_OFFSET 0

#define	AS923_MIN_TX_POWER TX_POWER_7

#define	AS923_MAX_TX_POWER TX_POWER_0

#define	AS923_DEFAULT_TX_POWER TX_POWER_0

#define	AS923_DEFAULT_UPLINK_DWELL_TIME 1

#define	AS923_DEFAULT_DOWNLINK_DWELL_TIME 1

#define	AS923_DEFAULT_MAX_EIRP 16.0f

#define	AS923_DEFAULT_ANTENNA_GAIN 2.15f

#define	AS923_ADR_ACK_LIMIT 64

#define	AS923_ADR_ACK_DELAY 32

#define	AS923_DUTY_CYCLE_ENABLED 0

#define	AS923_MAX_RX_WINDOW 3000

#define	AS923_RECEIVE_DELAY1 1000

#define	AS923_RECEIVE_DELAY2 2000

#define	AS923_JOIN_ACCEPT_DELAY1 5000

#define	AS923_JOIN_ACCEPT_DELAY2 6000

#define	AS923_MAX_FCNT_GAP 16384

#define	AS923_ACKTIMEOUT 2000

#define	AS923_ACK_TIMEOUT_RND 1000

#define	AS923_RX_WND_2_DR DR_2

#define	AS923_MAX_NB_BANDS 1

#define	AS923_BAND0

#define	AS923_LC1

#define	AS923_LC2

#define	AS923_LC3

#define	AS923_LC4

#define	AS923_LC5

#define	AS923_LC6

#define	AS923_LC7

#define	AS923_LC8

#define	AS923_JOIN_CHANNELS (uint16_t)(LC(1) \| LC(2))

#define	AS923_RSSI_FREE_TH -85

#define	AS923_CARRIER_SENSE_TIME 6
Functions
PhyParam_t	RegionAS923GetPhyParam (GetPhyParams_t *getPhy)
	The function gets a value of a specific phy attribute. More...

void	RegionAS923SetBandTxDone (SetBandTxDoneParams_t *txDone)
	Updates the last TX done parameters of the current channel. More...

void	RegionAS923InitDefaults (InitType_t type)
	Initializes the channels masks and the channels. More...

bool	RegionAS923Verify (VerifyParams_t *verify, PhyAttribute_t phyAttribute)
	Verifies a parameter. More...

void	RegionAS923ApplyCFList (ApplyCFListParams_t *applyCFList)
	The function parses the input buffer and sets up the channels of the CF list. More...

bool	RegionAS923ChanMaskSet (ChanMaskSetParams_t *chanMaskSet)
	Sets a channels mask. More...

bool	RegionAS923AdrNext (AdrNextParams_t adrNext, int8_t drOut, int8_t txPowOut, uint32_t adrAckCounter)
	Calculates the next datarate to set, when ADR is on or off. More...

void	RegionAS923ComputeRxWindowParameters (int8_t datarate, uint8_t minRxSymbols, uint32_t rxError, RxConfigParams_t *rxConfigParams)

bool	RegionAS923RxConfig (RxConfigParams_t rxConfig, int8_t datarate)
	Configuration of the RX windows. More...

bool	RegionAS923TxConfig (TxConfigParams_t txConfig, int8_t txPower, TimerTime_t *txTimeOnAir)
	TX configuration. More...

uint8_t	RegionAS923LinkAdrReq (LinkAdrReqParams_t linkAdrReq, int8_t drOut, int8_t txPowOut, uint8_t nbRepOut, uint8_t *nbBytesParsed)
	The function processes a Link ADR Request. More...

uint8_t	RegionAS923RxParamSetupReq (RxParamSetupReqParams_t *rxParamSetupReq)
	The function processes a RX Parameter Setup Request. More...

uint8_t	RegionAS923NewChannelReq (NewChannelReqParams_t *newChannelReq)
	The function processes a Channel Request. More...

int8_t	RegionAS923TxParamSetupReq (TxParamSetupReqParams_t *txParamSetupReq)
	The function processes a TX ParamSetup Request. More...

uint8_t	RegionAS923DlChannelReq (DlChannelReqParams_t *dlChannelReq)
	The function processes a DlChannel Request. More...

int8_t	RegionAS923AlternateDr (AlternateDrParams_t *alternateDr)
	Alternates the datarate of the channel for the join request. More...

void	RegionAS923CalcBackOff (CalcBackOffParams_t *calcBackOff)
	Calculates the back-off time. More...

bool	RegionAS923NextChannel (NextChanParams_t nextChanParams, uint8_t channel, TimerTime_t time, TimerTime_t aggregatedTimeOff)
	Searches and set the next random available channel. More...

LoRaMacStatus_t	RegionAS923ChannelAdd (ChannelAddParams_t *channelAdd)
	Adds a channel. More...

bool	RegionAS923ChannelsRemove (ChannelRemoveParams_t *channelRemove)
	Removes a channel. More...

void	RegionAS923SetContinuousWave (ContinuousWaveParams_t *continuousWave)
	Sets the radio into continuous wave mode. More...

uint8_t	RegionAS923ApplyDrOffset (uint8_t downlinkDwellTime, int8_t dr, int8_t drOffset)
	Computes new datarate according to the given offset. More...

bool	RegionAS923SetVersion (uint8_t version)
	Adjust frequency band to AS923-1, AS923-2, AS923-3. More...
Variables
static const uint8_t	DataratesAS923 [] = {12, 11, 10, 9, 8, 7, 7, 50}

static const uint32_t	BandwidthsAS923 [] = {125000, 125000, 125000, 125000, 125000, 125000, 250000, 0}

static const uint8_t	MaxPayloadOfDatarateDwell0AS923 [] = {59, 59, 59, 123, 230, 230, 230, 230}

static const uint8_t	MaxPayloadOfDatarateRepeaterDwell0AS923 [] = {59, 59, 59, 123, 250, 250, 250, 250}

static const uint8_t	MaxPayloadOfDatarateDwell1UpAS923 [] = {0, 0, 19, 61, 133, 250, 250, 250}

static const uint8_t	MaxPayloadOfDatarateDwell1DownAS923 [] = {0, 0, 19, 61, 133, 250, 250, 250}

static const int8_t	EffectiveRx1DrOffsetAS923 [] = {0, 1, 2, 3, 4, 5, -1, -2}