/*
 * THIS FILE IS AUTOMATICALLY GENERATED
 *
 * Generator:     sensirion-driver-generator 1.7.0
 * Product:       sen66
 * Model-Version: 1.7.1
 */
/*
 * Copyright (c) 2026, Sensirion AG
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are met:
 *
 * * Redistributions of source code must retain the above copyright notice, this
 *   list of conditions and the following disclaimer.
 *
 * * Redistributions in binary form must reproduce the above copyright notice,
 *   this list of conditions and the following disclaimer in the documentation
 *   and/or other materials provided with the distribution.
 *
 * * Neither the name of Sensirion AG nor the names of its
 *   contributors may be used to endorse or promote products derived from
 *   this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
#include <Arduino.h>
#include <SensirionI2cSen66.h>
#include <Wire.h>

// macro definitions
// make sure that we use the proper definition of NO_ERROR
#ifdef NO_ERROR
#undef NO_ERROR
#endif
#define NO_ERROR 0

SensirionI2cSen66 sensor;

static char errorMessage[64];
static int16_t error;

void setup() {

    Serial.begin(115200);
    while (!Serial) {
        delay(100);
    }
    Wire.begin();
    sensor.begin(Wire, SEN66_I2C_ADDR_6B);

    error = sensor.deviceReset();
    if (error != NO_ERROR) {
        Serial.print("Error trying to execute deviceReset(): ");
        errorToString(error, errorMessage, sizeof errorMessage);
        Serial.println(errorMessage);
        return;
    }
    delay(1200);
    int8_t serialNumber[32] = {0};

    error = sensor.getSerialNumber(serialNumber, 32);
    if (error != NO_ERROR) {
        Serial.print("Error trying to execute getSerialNumber(): ");
        errorToString(error, errorMessage, sizeof errorMessage);
        Serial.println(errorMessage);
        return;
    }
    Serial.print("serialNumber: ");
    Serial.print((const char*)serialNumber);
    Serial.println();
    error = sensor.startContinuousMeasurement();
    if (error != NO_ERROR) {
        Serial.print("Error trying to execute startContinuousMeasurement(): ");
        errorToString(error, errorMessage, sizeof errorMessage);
        Serial.println(errorMessage);
        return;
    }
    delay(1100);
}

void loop() {

    float massConcentrationPm1p0 = 0.0;
    float massConcentrationPm2p5 = 0.0;
    float massConcentrationPm4p0 = 0.0;
    float massConcentrationPm10p0 = 0.0;
    float humidity = 0.0;
    float temperature = 0.0;
    float vocIndex = 0.0;
    float noxIndex = 0.0;
    uint16_t co2 = 0;

    delay(1000);
    error = sensor.readMeasuredValues(
        massConcentrationPm1p0, massConcentrationPm2p5, massConcentrationPm4p0,
        massConcentrationPm10p0, humidity, temperature, vocIndex, noxIndex,
        co2);
    if (error != NO_ERROR) {
        Serial.print("Error trying to execute readMeasuredValues(): ");
        errorToString(error, errorMessage, sizeof errorMessage);
        Serial.println(errorMessage);
        return;
    }
    Serial.print("massConcentrationPm1p0: ");
    Serial.print(massConcentrationPm1p0);
    Serial.print("\t");
    Serial.print("massConcentrationPm2p5: ");
    Serial.print(massConcentrationPm2p5);
    Serial.print("\t");
    Serial.print("massConcentrationPm4p0: ");
    Serial.print(massConcentrationPm4p0);
    Serial.print("\t");
    Serial.print("massConcentrationPm10p0: ");
    Serial.print(massConcentrationPm10p0);
    Serial.print("\t");
    Serial.print("humidity: ");
    Serial.print(humidity);
    Serial.print("\t");
    Serial.print("temperature: ");
    Serial.print(temperature);
    Serial.print("\t");
    Serial.print("vocIndex: ");
    Serial.print(vocIndex);
    Serial.print("\t");
    Serial.print("noxIndex: ");
    Serial.print(noxIndex);
    Serial.print("\t");
    Serial.print("co2: ");
    Serial.print(co2);
    Serial.println();
}
